Instrumentation Cable

Instrumentation cable is a type of specialized electrical cable used in industrial settings to transmit signals and measurements between instrumentation and control devices.

 

Request A Quote

Description

Overall Screen Instrumentation Cable

Voltage: 300/500V

Conductor: Circular stranded copper

Type:  Single pair or multi-pair

Insulated: PE or PVC

Pairing: Two insulated cores shall be uniformly twisted together to form a pair with a maximum lay length of 100mm

Cabling: Twisted pairs are laid up together if necessary filled with non-hygroscopic material compatible with the insulation.

Overall Screening: Accumulated pairs screened with aluminum/mylar tape, helically applied with the metallic side down, in electrical contact with a tinned annealed copper drain wire of 0.5mm2

Sheath: PVC(Polyvinyl Chloride)

OS-img

OS + IS Instrumentation Cable

Voltage: 300/500V

Conductor: Circular stranded copper

Type: Multi-pair

Insulated:PE or PVC

Pairing: Two insulated cores shall be uniformly twisted together to form a pair with a maximum lay length of 100mm

Individual Screening: Each pair screen with aluminum/mylar tape, helically applied with the meta side down, in electrical contact with a tinned annealed copper drain wire of 0.5mm2

Cabling: Twisted pairs are laid up together if necessary filled with non-hygroscopic material compatible with the insulation.

Overall Screening: Accumulated pairs screened with aluminum/mylar tape, helically applied with the metallic side down, in electrical contact with a tinned annealed copper drain wire of 0.5mm2

Sheath: PVC(Polyvinyl Chloride)

OSIS-img

Application

Instrumentation cables are commonly used in industries such as oil and gas, petrochemical, power generation, manufacturing, and process control.

They are employed to connect various instruments and sensors, including temperature sensors, pressure transmitters, flow meters, level detectors, and control valves, to monitoring and control systems.

Features

Huadong’s instrumentation cables are protected against electromagnetic interference (EMI) and radio frequency interference (RFI). Have low capacitance to reduce signal attenuation and distortion. Are heat and chemical resistant and can withstand harsh environmental conditions.

Standard

BS 7917, IEC 60331-31.

OS Instrumentation Cable Specification

OS + IS Instrumentation Cable Specification

Reviews

There are no reviews yet.

Be the first to review “Instrumentation Cable”

Your email address will not be published. Required fields are marked *